China Sk-0.4 1.5kw 0.4m3/Min Liquid Ring Vacuum Pump did chain and sprocket kit

Product Description

Merchandise Description

SK collection liquid ring vacuum pumps and compressors are utilised to pump or compress air and other non-corrosive, h2o-insoluble and sound particle-free gases to generate vacuum or force in shut containers, and a small volume of liquid is permitted with the inhaled gas. It is widely utilized in equipment, petrochemical, pharmaceutical, meals, sugar market and paper producing. Since the compression approach of fuel is isothermal, it is unlikely to be dangerous with explosive gases, which helps make its software far more widely.
2SK sequence 2 phase liquid ring vacuum pumps whose suction speed is great even in higher vacuum,are a lot more in shape to operate when the suction strain is between -.085MPa~.095MPa.

Technical knowledge

Technical data of SK series Liquid ring vacuum pump

Model Pumping Speed(m3/min) Ultimate Pressure Motor Electricity(kw) Pump Rotation Pace(rpm) Compresssor stress(MPa) Connection dimension Water essential(L/min)
Max Inlet strain:-.06MPa (mmHg) (MPa) Vacuum pump Compressor Inlet Outlet
SK-.4 .4 .36 -seven-hundred -.093 one.5 / 2840 / G1″ G1″  
SK-.eight .eight .72 -seven-hundred -.093 two.2 / 2840 / G1″ G1″  
SK-1.5B one.five one.35 -seven-hundred -.093 4 / 2860 / G1″/4″ G1″/4″  
SK-1.five one.5 1.35 -700 -.093 4 5.five 1440 .fifteen 70 70 twenty-thirty
SK-3 three two.eight -seven-hundred -.093 five.five 7.5 1440 .15 70 70 forty-fifty
SK-six 6 5.4 -seven-hundred -.093 eleven 15 1440 .15 eighty eighty 50-sixty
SK-12 12 10.eight -700 -.093 18.five 30 970 .15 eighty eighty sixty-70
SK-20 twenty eighteen -seven-hundred -.093 37 fifty five 730 .15 150 a hundred and fifty 70-eighty
SK-30 30 27 -700 -.093 55 seventy five 730 .fifteen one hundred fifty one hundred fifty ninety-one hundred
SK-forty two forty two 37.eight -700 -.093 75 / 730 / one hundred fifty 150 a hundred and twenty-140
SK-60 60 fifty four -seven-hundred -.093 95 / 550 / 250 250 140-one hundred sixty
SK-85 eighty five 76.5 -seven-hundred -.093 132 / 550 / 250 250 160-one hundred eighty
SK-120 120 108 -seven hundred -.093 185 / 490 / three hundred three hundred 200-220

Technological data of 2SK collection Liquid ring vacuum pump

Model Pumping Velocity(m3/min) Supreme Strain(MPa) Motor Power(KW) Motor Speed(r/min) H2o necessary(L/min) Inlet measurement(mm) Outlet dimensions(mm) Weight(kg)
2SK-.four .4 -.097 2.two 2840 5~eight G1” G1” one hundred twenty
2SK-.eight .eight -.097 3 2880 ten~15 G1” G1” a hundred and fifty
2SK-1.five one.five -.097 four 1440 20~twenty five 40 40 230
2SK-3 3 -.097 7.five 1440 30~forty 40 forty 320
2SK-6 six -.097 15 1460 forty five~fifty fifty 50 500
2SK-nine 9 -.097 eighteen.five 970 fifty~sixty 100 a hundred 700
2SK-twelve 12 -.097 22 970 60~70 a hundred a hundred 800
2SK-fifteen fifteen -.097 thirty 970 eighty~ninety a hundred a hundred one thousand
2SK-twenty 20 -.097 37 740 100~a hundred and twenty a hundred twenty five a hundred twenty five 1650
2SK-twenty five 25 -.097 45 740 120~one hundred forty 125 125 1800
2SK-30 30 -.097 55 740 one hundred thirty~a hundred and sixty one hundred twenty five a hundred twenty five 1950

FAQ

Q: What data need to I supply for an inquiry?
A: You can inquire based mostly on the design immediately, but it is always advisable that you make contact with us so that we can aid you to verify if the pump is the most appropriate for your software.

Q: Can you make a custom-made vacuum pump?
A: Sure, we can do some special styles to meet consumer programs. This sort of as customized sealing programs, speical area remedy can be utilized for roots vacuum pump and screw vacuum pump. Please speak to us if you have particular needs. 

Q: I have difficulties with our vacuum pumps or vacuum techniques, can you offer some help?
A: We have software and design and style engineers with more than 30 many years of knowledge in vacuum applications in diverse industries and help a lot of customers take care of their problems, these kinds of as leakage concerns, strength-saving solutions, a lot more atmosphere-friendly vacuum programs, and so forth. Please contact us and we will be quite content if we can provide any assist to your vacuum system.

Q: Can you layout and make customized vacuum techniques?
A: Sure, we are excellent for this.

Q: What is your MOQ?
A: 1 piece or 1 set.

Q: How about your delivery time?
A: 5-10 operating days for the standard vacuum pump if the amount is under 20 items, twenty-30 doing work days for the conventional vacuum method with considerably less than 5 sets. For more quantity or specific specifications, make sure you speak to us to verify the lead time.

Q: What are your payment conditions?
A: By T/T, 50% progress payment/deposit and fifty% compensated before cargo.

Q: How about the warranty?
A: We offer 1-calendar year warranty (apart from for the wearing parts).

Q: How about the service?
A: We supply distant video specialized assist. We can send the services engineer to the web site for some particular requirements.

After-sales Service: Online Video Instruction
Warranty: 1 Year
Max Pumping Speed: 0.4m3/Min
Pumping Speed (Inlet Pressure: -0.06MPa): 0.36m3/Min
Ultimate Pressure: -700 Mmhg
Motor Voltage: 380V

###

Model Pumping Speed(m3/min) Ultimate Pressure Motor Power(kw) Pump Rotation Speed(rpm) Compresssor pressure(MPa) Connection size Water required(L/min)
Max Inlet pressure:-0.06MPa (mmHg) (MPa) Vacuum pump Compressor Inlet Outlet
SK-0.4 0.4 0.36 -700 -0.093 1.5 / 2840 / G1" G1"  
SK-0.8 0.8 0.72 -700 -0.093 2.2 / 2840 / G1" G1"  
SK-1.5B 1.5 1.35 -700 -0.093 4 / 2860 / G1"/4" G1"/4"  
SK-1.5 1.5 1.35 -700 -0.093 4 5.5 1440 0.15 70 70 20-30
SK-3 3 2.8 -700 -0.093 5.5 7.5 1440 0.15 70 70 40-50
SK-6 6 5.4 -700 -0.093 11 15 1440 0.15 80 80 50-60
SK-12 12 10.8 -700 -0.093 18.5 30 970 0.15 80 80 60-70
SK-20 20 18 -700 -0.093 37 55 730 0.15 150 150 70-80
SK-30 30 27 -700 -0.093 55 75 730 0.15 150 150 90-100
SK-42 42 37.8 -700 -0.093 75 / 730 / 150 150 120-140
SK-60 60 54 -700 -0.093 95 / 550 / 250 250 140-160
SK-85 85 76.5 -700 -0.093 132 / 550 / 250 250 160-180
SK-120 120 108 -700 -0.093 185 / 490 / 300 300 200-220

###

Model Pumping Speed(m3/min) Ultimate Pressure(MPa) Motor Power(KW) Motor Speed(r/min) Water required(L/min) Inlet size(mm) Outlet size(mm) Weight(kg)
2SK-0.4 0.4 -0.097 2.2 2840 5~8 G1” G1” 120
2SK-0.8 0.8 -0.097 3 2880 10~15 G1” G1” 150
2SK-1.5 1.5 -0.097 4 1440 20~25 40 40 230
2SK-3 3 -0.097 7.5 1440 30~40 40 40 320
2SK-6 6 -0.097 15 1460 45~50 50 50 500
2SK-9 9 -0.097 18.5 970 50~60 100 100 700
2SK-12 12 -0.097 22 970 60~70 100 100 800
2SK-15 15 -0.097 30 970 80~90 100 100 1000
2SK-20 20 -0.097 37 740 100~120 125 125 1650
2SK-25 25 -0.097 45 740 120~140 125 125 1800
2SK-30 30 -0.097 55 740 130~160 125 125 1950
After-sales Service: Online Video Instruction
Warranty: 1 Year
Max Pumping Speed: 0.4m3/Min
Pumping Speed (Inlet Pressure: -0.06MPa): 0.36m3/Min
Ultimate Pressure: -700 Mmhg
Motor Voltage: 380V

###

Model Pumping Speed(m3/min) Ultimate Pressure Motor Power(kw) Pump Rotation Speed(rpm) Compresssor pressure(MPa) Connection size Water required(L/min)
Max Inlet pressure:-0.06MPa (mmHg) (MPa) Vacuum pump Compressor Inlet Outlet
SK-0.4 0.4 0.36 -700 -0.093 1.5 / 2840 / G1" G1"  
SK-0.8 0.8 0.72 -700 -0.093 2.2 / 2840 / G1" G1"  
SK-1.5B 1.5 1.35 -700 -0.093 4 / 2860 / G1"/4" G1"/4"  
SK-1.5 1.5 1.35 -700 -0.093 4 5.5 1440 0.15 70 70 20-30
SK-3 3 2.8 -700 -0.093 5.5 7.5 1440 0.15 70 70 40-50
SK-6 6 5.4 -700 -0.093 11 15 1440 0.15 80 80 50-60
SK-12 12 10.8 -700 -0.093 18.5 30 970 0.15 80 80 60-70
SK-20 20 18 -700 -0.093 37 55 730 0.15 150 150 70-80
SK-30 30 27 -700 -0.093 55 75 730 0.15 150 150 90-100
SK-42 42 37.8 -700 -0.093 75 / 730 / 150 150 120-140
SK-60 60 54 -700 -0.093 95 / 550 / 250 250 140-160
SK-85 85 76.5 -700 -0.093 132 / 550 / 250 250 160-180
SK-120 120 108 -700 -0.093 185 / 490 / 300 300 200-220

###

Model Pumping Speed(m3/min) Ultimate Pressure(MPa) Motor Power(KW) Motor Speed(r/min) Water required(L/min) Inlet size(mm) Outlet size(mm) Weight(kg)
2SK-0.4 0.4 -0.097 2.2 2840 5~8 G1” G1” 120
2SK-0.8 0.8 -0.097 3 2880 10~15 G1” G1” 150
2SK-1.5 1.5 -0.097 4 1440 20~25 40 40 230
2SK-3 3 -0.097 7.5 1440 30~40 40 40 320
2SK-6 6 -0.097 15 1460 45~50 50 50 500
2SK-9 9 -0.097 18.5 970 50~60 100 100 700
2SK-12 12 -0.097 22 970 60~70 100 100 800
2SK-15 15 -0.097 30 970 80~90 100 100 1000
2SK-20 20 -0.097 37 740 100~120 125 125 1650
2SK-25 25 -0.097 45 740 120~140 125 125 1800
2SK-30 30 -0.097 55 740 130~160 125 125 1950

How to choose the right sprocket

Knowing the size of the chain is important when looking for the right sprocket. Also, you must know the number of teeth you need and their angle. The angle between the teeth is equal to 360 degrees divided by the number of teeth. This information will help you find the right sprocket for your specific application.sprocket

Long Through Hole

Sprockets are critical to the efficiency and uptime of roller chain drives. To ensure your sprocket is installed correctly, it is important to know the dimensions of the sprocket, including its outside diameter, through-hole length, and hub diameter. Pore ​​size is also an important consideration. Most sprockets have a 1/8″ bore, while others may have a larger bore.
Sprockets are usually secured to the shaft using ANSI standard-sized keyways and set screws. However, not all sprockets are compatible with all shaft diameters, so it is important to check the keyway size before purchasing.
Sprockets are available in a variety of styles and configurations. Some types of sprockets are welded to a solid hub, while others are bolted or split to the hub. Both types have different adjustments and you can easily change them without disassembling the device. Sprockets can be purchased from many US manufacturers in A, B or C hub configurations. For example, the hub diameter of an A-type sprocket determines its width, while a B-type sprocket has a hole for a bushing.
Sprockets are used in chain-driven motion systems, usually to carry heavy loads. It is very important to choose the right app for the right app to avoid damaging your device. If you’re not sure, learn about your system and how it’s assembled.

face width

The face width of the sprocket is limited by the meshing clearance with the chain. It does not affect tooth length. The outside diameter of the chain tip may vary depending on the type of tool used. Dimensional tolerances for keyways and set screws are also important.

diameter

One of the most important characteristics of a sprocket is its diameter. The diameter of the sprocket is used as a guide for choosing the proper sprocket size for your bike. Its number of teeth and diameter also affect the size of the chain.
The diameter of a sprocket is a function of its pitch or the distance between the centers of the link hinges. Diameters are in millimeters and expressed in standard ANSI chain numbers. Popular spacing is 3/8″ or 1/2″.
In order to make the chain drive smoothly, the sprocket and the chain should be properly matched. Incorrect pitch sprockets can damage the chain and shorten its life. Sprockets should provide precise tooth count, consistent pitch, and high wear resistance. It should also be designed to be rigid and impact resistant. CZPT chain suppliers can custom design sprockets in a variety of sizes, pitches, and diameters to suit your needs.
The number of teeth on the roller sprocket is also important. This is because the sprocket is in contact with the chain, causing frictional wear. The teeth on the sprocket can affect the durability of the chain, which is why choosing a sprocket with hardened teeth can change the world.sprocket

hub type

The hub type of the sprocket is key to proper engagement with the chain. Several options are available. The sprocket hub type is cylindrical and is available in a variety of sizes and styles. Sprockets are usually made of steel or stainless steel.
There are four main types of hubs for sprockets. They come under different names from different manufacturers, but they all share some common characteristics. These include Types A, B, and C. Each type has its own advantages and disadvantages. A-Plate sprockets are flat and have no hubs, while B-Hub sprockets are flat with hubs mounted on one side of the plate. C-shaped sprockets extend on both sides of the plate for larger pitch circle diameters and heavier axles.
A sprocket with a large pitch diameter needs a sprocket with a large pitch, and a chain with a small pitch diameter needs a chain with a small pitch. A-type sprockets are smaller and fit more closely to the equipment, while C-type sprockets need to be wider and thicker to carry more weight. Also, the pitch diameter is important because it determines whether the sprocket will fit correctly with the chain.
Steel split sprockets are easy to install and remove. They are held together by bolts on the hub, ranging in pitch size from 40 to 240. They are typically used in applications involving multiple drive shafts.

HZPT ZTB series

ZTB sprockets are an important part of a bicycle chain system. Its uptime is very important to maximize uptime and efficiency. key cSelect sprockets are characterized by size, pitch and bore. MDS accepts sprockets of various bore diameters from 1/2″ to 2″.
A sprocket is a wheel-like structure with teeth on the end. These teeth interlock with the chain, allowing simple rotational movement of large machines and equipment. ZTB sprockets are an excellent choice for a wide range of applications, including construction and agricultural machinery.
ISO sprockets have a suffix number indicating the number of chains in the chain. For example, 16B-2 sprockets have 1″ pitch and dual spools. If you’re buying sprockets for your bike, be sure to check the sprocket pitch.
The teeth on the sprocket are responsible for frictional wear, so choosing the right teeth is critical. The right teeth can increase the life of the sprocket and chain. A good sprocket has at least 17 teeth. Sprockets with a higher number of teeth last longer without causing chain slip. Typically, the teeth are the same material as the sprockets, but you can find removable teeth for a more affordable option. The teeth on the sprocket can also be hardened. Induction hardening is the most commonly used process.
ZTB sprockets can be made from many different materials. Some materials are more expensive than others, while others are softer and stronger. If you’re not sure which one to buy, try explaining the difference between the different sprockets to the sprocket manufacturer. They should be able to give you details about their interchangeability and quality.
sprocket

set screw

Set screws are screws designed to hold two or more parts together. There are many different types of set screws, each with a different purpose and design. They usually come in imperial and metric sizes with a hex socket driver on one end and a cup tip on the other. They are made of hardened steel and have a black oxide finish. Some varieties have flanges, while others don’t.
Set screws with chain studs can be used in a variety of applications. For example, they can be used in agricultural equipment, heavy equipment and other industries. They come in several different sizes and thread sizes and are available in a variety of designs. Some are specific to the mining industry, while others are more general.
The company also offers custom setscrews, as well as hex, spline, square and socket heads. They have the capability to manufacture fasteners ranging from carbon steel to nickel and silicon bronze. Their products also meet Mil-I-4528 and QS 14000 standards.

China Sk-0.4 1.5kw 0.4m3/Min Liquid Ring Vacuum Pump     did chain and sprocket kitChina Sk-0.4 1.5kw 0.4m3/Min Liquid Ring Vacuum Pump     did chain and sprocket kit
editor by czh2022-12-01